1st Press
Apply FIRM PRESSURE at 300-315 degrees Fahrenheit for 6-9 seconds with the image in theproper placement.
Experiment with your heat press for optimal results.
Our films are Instant Peel/Cold Peel.
- Cold Peel : Let the transfer cool completely before removing the film. This is our most PREFERRED peel method.
- Instant Peel : After pressing, immediately and gently peel.
2nd Press
Heat Press with FIRM PRESSURE 3-5 seconds. Heat settings will vary depending on the material of the apparel/item.
FIRM and EVEN pressure is important for good adhesion. Avoid any pockets, seams, buttons, zippers, etc. within the press area.
The above instructions are for Cotton and Cotton/Polyester blends.
For 100% Polyester Lower
the temperature to 250-275 degrees and shorten the press time to 5-7 seconds.
Practice to determine the best time, temperature, and pressure.
As DTF can be applied to many surfaces, each surface may require a different heat and time under pressure settings. Please get in touch with us if you have any question.
E-Mail : support@dtfil.com
Call/Text : +1 980 384 3166